Specifications

Email your order to us at [e-mail]
16
IR Distribution
Democontrol Lite App now FREE on
itunes (search Democontrol Lite)
Input Components
Standard IR Receiver 40kHz
– suitable for most
domestic equipment.
Extension
Extension leads, 3.5mm stereo jack plug to 3.5mm
stereo socket to be used on input or output as
required. We’ve tested the input up to 10m and the
output to 20m.
Powermid IR lead to feed a
Powermid RF receiver output
directly to the IR Distribution
Amp input (3.5mm stereo jack
plug to 3.5mm stereo jack plug 1.2m long).
Code
KLDE6M £5.99
IRSR built into a smart flush
wall plate (For full details
see previous page).
Code
IRSP £24.99
An Infra Red panel mount receiver designed to be used
with the Keene IRBKIT and IR Commander IR distribution
amplifiers. This receiver can be fitted into the cabinet
casing or studded wall.
• Requires a 16mm diameter hole
• Overall thread length 44mm
• Maximum material thickness 38mm
• Visible bezel diameter 30mm
• Connection is via a 1m cable to 3.5mm jack plug
Code
IRPMR black £29.99
Code IRPMRW white £29.99
This IR receiver is designed to be affixed directly to the
fascia on your display. Super fast electronics and a semi-
wideband capability make it really effective to use whilst
it’s compact size makes it very unobtrusive. The LED
provides visual confirmation that the signal has been
received. Typical IR receivers require a minimum of 10
cycles before they can “lock” onto the signal.
This receiver will work with just 3 or 4 cycles.
This fast circuitry enables it to work with set
top boxes that use very short bursts of IR
code (known as RCMM code), as used for
example by some BT Vision set top boxes.
Code
IRFMR £14.99
Code IRSR £12.99
Wide Band IR Receiver Up
to 100kHz – for more
esoteric equipment.
Code
IRWBR £18.99
Code KLD40 3M £4.49
Code KLD405 5M £4.99
Code KLD4010 10M £8.99
IR Universal Wand. The Universal
wand is designed for use in low
power outputs and can be
equipment fascia or shelf mounted.
Code
IRUW £5.99
IR Dual output Wands
The single jack plug drives two
IR emitter wands. The emitters
are extremely tiny (just 9mm
across) and are supplied with
double sided adhesive pads to
affix directly to the equipment fascia. The emitters
actually flash red as the IR signal is emitted giving visual
confirmation that the IR signal was received and
transmitted correctly.
Code
IRDW £9.99
Low Power Wand. Can be
attached directly to the
equipment facia or will work up
to 4 metres away. Even when
attached directly the equipment
will still respond to external IR signals. Only to be used
in the IR Distribution Amp low power output sockets.
Code
IRLPW £5.99
High Power Wand. Will operate
equipment from up to 10 meters
away. Can also be used in the IR
Distribution Amp low power
output sockets if required, but will
then only perform as a low power
emitter. Not suitable for one-to-one operation.
Code
IRHPW £7.99
Side Firing Wand. A short range
emitter for direct attachment to
the equipment fascia.
Code
IRSFW £7.99