Specifications

Email your order to us at [e-mail]
12
AV – Distribution
Note: The KPDA is an amplifier only. It will not convert
from one video standard to another.
BULK PRICING (50+) and
OEM AVAILABLE on this product
Keene KPDA 1:5 Component Video & Audio Distribution Amplifier
• One input, five fully buffered outputs
• Wide bandwidth HDTV capable
• Broadcast quality high speed video buffers
• Use for component video, RGBs video, RGsB video or
four x composite video plus stereo audio
• One video channel may be used for digital audio
The KPDA is a high quality audio/video distribution
amplifier, allowing one video and audio source to
simultaneously supply up to five other devices. It uses
very high quality high bandwidth ICs to ensure that
each output is not discernible from the input, making it
ideally suited to driving multiple displays or making
multiple copies from one source. There are two stereo
audio channels and four video channels, making it
suitable for use with component video, RGBs video,
RGsB video or 4 x composite video plus audio. Any of
the video channels can also be used for digital audio
if desired.
Specifications:
• Power requirements: by external supply to DC input
socket, (2.1mm centre positive) 12-18v DC @ 300mA
or greater
• Video: 5 buffered video outputs bandwidth 75MHz
(up to 1080p)
• Level - composite / luminance 1v pp, chrominance
0.3v peak to peak
• Distortion components <–50db up to 10MHz
• Open circuit voltage gain is X2 (unity gain when
correctly terminated)
• Back terminated series 75 Ohm outputs for reflection
free performance
• DC coupled on all outputs
• Slew rate up to 500v/uS
• Audio: 5 buffered audio outputs
• Distortion <0.1%
• Bandwidth 20Hz – 30kHz
• Output impedance, <1k ohm each output
• Input impedance >10K ohm
• Unity gain
• Dimensions: 220mm x 104mm x 43mm
• Weight: 780g (excluding power supply)
Keene SDA 1:5 Scart Distribution Amplifier
One input to five outputs, fully buffered using
broadcast grade video amplification ICs. Pin 8 is routed
through (if the input goes high all the outputs go high)
and every pin connection is carried through making it
suitable for composite, S-video, component or RGB.
Supplied in a robust metal case this is ideal for
displaying one signal on multiple TVs or for making up
to five simultaneous copies from one source. Mains
adaptor included.
Specifications:
• Power: 12-18v DC @ 300mA
• Video: 5 buffered video outputs
• Video bandwidth: 50MHz
• Video level: Composite / Luminance 1v pp,
Chrominance 0.3v peak to peak.
• Video distortion: < -50db up to 10Mhz
• Back terminated series 75R outputs for reflection
free performance
• DC coupled on all outputs
• Slew rate up to 500v/uS
• Audio: 5 buffered audio outputs
• Audio distortion: <0.1% Bandwidth 20Hz - 30KHz
• Audio output impedance: <1K ohms each output
• Audio input impedance: >10K ohms Unity gain
• Dimensions 219 x 115 x 37mm
• Weight 725g (exc supply & cables)
Code KPDA £89.99
Code SDA UK model with UK 3-pin
mains plug order
£99.99
Code SDAE Euro model with round 2-pin
mains plug order £99.99
BULK PRICING (50+) and
OEM AVAILABLE on this product