Specifications

Email your order to us at [e-mail]
10
Analogue Stereo Lip Sync Corrector
This analogue stereo Lip Sync Corrector is a small device
for delaying audio signal to overcome audio sync issues.
The AU-D18 Lip Sync corrector is able to adjust the
timing to the display/amplifier so that users may
received both video and audio in sync. No more
annoying sound mismatch. The Lip SyncCorrector is
easy to use with a simple setup and an affordable unit
for sound delaying.
Features:
• Lip Sync corrector with adjustable delay between
0 & 300ms
• Sample Rates 48 kHz
• Analogue to analogue signal bypass
• Low power consumption
Specifications:
• Inputs 2 x Analogue Audio (L/R stereo)
• Outputs 2 x Analogue Audio (L/R stereo)
• Power 5V/1A DC
• Dimensions 45(D) x 45(W) x 25(H)mm.
Code
AU11SA £108.43
Audio
AU-11CA HDMI Audio Embedder with built in Repeater
The AU-11CA Audio Embedder lets you insert an external
audio signal into any HDMI source. The device allows
you to insert analogue or digital stereo and
multi-channel digital surround sound signals \
(via Optical) to give users the capability to overcome
audio issues within complex HDMI installation. The AU-
11CA also repeats the HDMI signal to allow an extended
total HDMI cable range.
Features:
• Compliant with HDMI v1.3 , HDCP 1.2 and DVI 1.0
• Supports Optical Sample Rate up to 96 kHz
• Supports LPCM Stereo, DTS and Dolby Digital
via Optical input
• Supports up to 24bit resolution digital audio
• HDMI cable distance testing showed that with 1080p
8bit/12bit resolution, the input/output distance is up
to 10 meters
• Low power consumption
• Supports HDMI Sample Rates up to 192kHz
AU-11SA Audience HDMI Audio De-Embedder Repeater
The AU-11SA is an advanced solution for HDMI to HDMI
repeating with Audio de-embedding. Its compatible with
v1.3 HDMI specifications, a cutting edge technology
which defines the transfer of deep colour (12 bit) video
with a high bandwidth of up to 225Mhz. Connect to
source and display (HDMI), select the required audio
format & output your audio format to your amplifier.
Features:
• Compliant with V1.3 HDMI, HDCP 1.1 and DVI1.1
• Decodes HDMI audio to analogue and digital
• Corrects digital error and automatically provides
equalisation up to 40dB
• Supports high definition input up to 1080p
– output resolution follows input
• Supports HDMI signal amplification and equalisation
output for repeater function – can be used to extend
up to 35m
• Supports uncompressed digital LPCM 7.1 / 5.1 or
2 channels & compressed digital Bitstream through
HDMI Input and output ports
• Supports LPCM 7.1 / 5.1 or 2 channels output
through multi-channel output ports
• Supports digital Dolby 5.1/ 2 and LPCM 2 channel
output through Optical Toslink
Code AU11CA £102.44
Code AUD18 £53.00