connections NEW Products & Special Offers A small selection from the 6000+ AV products on www.keene.co.uk Established in 1988 Trading online since 1996 USB FM Transmitter An incredibly easy way to stream music from your computer ter to any FM radio. Simply plug into any spare USB port and it installs as another sound device. Use the supplied software to set the output to a free FM channel and you’re ready to listen. Works with any FM radio (including the KLABKITD).
Audio Digital audio delay Lip sync problems? If you use an AV amplifier for your sound then we have a solution - the Felston DD740 digital audio delay module. It allows easy adjustable audio delay allowing you to get everything back in perfect sync. There are two inputs and you can switch and adjust from your armchair with the supplied remote.
Audio Coaxial/Toslink to L/R Stereo Audio Convertor This neat audio converter will convert the selected switched signal, either coaxial (RCA) or optical (Toslink) and convert the digital signal to analogue audio with a left and right output. Specifications: • Input: 1 x Toslink (Fibre Optic) & 1 Coaxial (RCA) • Outputs: 2 x RCA’s (Left and Right) Code AUD3192 6 £ .99 Code AGLI 49.24 Audience 4x1 Optical Toslink Digital Audio Switch Essential for correct sound recording.
Audio Boundary microphone ATR97 Tie clip windgag This is a low profile compact omni-directional boundary microphone from Audio Technica designed for tabletop use. Ideal for conferences, meetings and placing on the head table at weddings. A furry windjammer designed for lavalier (tie-clip) mics to be worn on the outside of the body. Supplied with removable foam inserts that can be combined with the supplied foam windgag to ensure a good fit.
Audio – Microphones Specifications: Rode RNGT1/2 The RODE RNTG1 and RNGT2 are lightweight condenser shotgun microphones, designed for professional applications within the film, video, television and production industries. The 48V phantom powered RNTG1 (phantom operating power only, RNTG2 has additional battery power option) and RNTG2 provides a balanced low impedance output stage.
Audio Architectural Speakers for use in Walls or Ceilings • Pivotal tweeters allow high frequencies to be focussed • Removable mesh grills • Frame allows for ceiling or wall board mount without extra brackets • 8 ohms KLAB20D • • • • • • • 20W RMS per channel stereo amplifier Class D digital circuitry Flush mount or surface mount MP3 front input jack socket Built in FM radio Rear line inputs Push button or IR remote control CMS5U • Frequency response: 80Hz - 20kHz • Power: 25W RMS • Overall Diameter: 2
Audio Sound Level Meter Digital Display Volume Remote Control Great value for money, this gives you the accuracy you need to fine tune your system. • Built in microphone • Seven selectable frequency ranges • Phono output (for connection to external equipment).
Audio Specifications: Full Range Dual Cone Bookshelf Speakers High quality 4" dual cone, full range mini box speaker. This 80 W Speaker has a Heavy Duty ABS Construction and Quick Connect Speaker Terminals. • • • • • • • • Colour Black Dimensions (mm) 120x120x132 Impedance (Ohms) 8 Sensitivity (dB) 90 Peak Music Power (W) 80 Power RMS (W) 40 Frequency Response (Hz) 80-20000 Type Dual Core (Supplied as a pair) Code B406A £18.
Audio Wireless Speakers • Enjoy your complete music collection anywhere in and around your home (bath room, kitchen, shed, etc.) wirelessly • Garden party, BBQ or a romantic evening with just the two of you on the balcony? Create the perfect atmosphere with matching music • Optimal music perception through high quality, omni directional two-way audio technology.
Audio AU-11CA HDMI Audio Embedder with built in Repeater The AU-11CA Audio Embedder lets you insert an external audio signal into any HDMI source. The device allows you to insert analogue or digital stereo and multi-channel digital surround sound signals \ (via Optical) to give users the capability to overcome audio issues within complex HDMI installation. The AU11CA also repeats the HDMI signal to allow an extended total HDMI cable range. Features: • Compliant with HDMI v1.3 , HDCP 1.2 and DVI 1.
Audio Rode Lavalier Microphone Whether you’re presenting for television or live on-stage, in a 20,000 seat auditorium or in a house of worship, The RODE Lavalier microphone has your needs covered. Featuring the pure, clear audio and low handling noise that RØDE is celebrated for, the LAVALIER is built to deliver and to last.
AV – Distribution Keene KPDA 1:5 Component Video & Audio Distribution Amplifier • • • • One input, five fully buffered outputs Wide bandwidth HDTV capable Broadcast quality high speed video buffers Use for component video, RGBs video, RGsB video or four x composite video plus stereo audio • One video channel may be used for digital audio The KPDA is a high quality audio/video distribution amplifier, allowing one video and audio source to simultaneously supply up to five other devices.
AV Switching & Distribution VGA & Audio Cat 5 Extender System Enables you to transmit VGA signals up to 150M (500ft.) away with resolution up to 1024 x 768. It features common mode noise suppression circuit for superb VGA quality via inexpensive unshielded twisted pair CAT5 cables. The Local unit duplicates the input signal for local use and transmits the VGA signal to a Remote unit. The Remote unit broadcasts the signal to two VGA outputs.
RGB Conversion Keene RGB2C RGB/Component video transcoder Composite / s-video to Component or RGB Another in-house product from Keene Electronics, the RGB2C can convert an RGB input to a component (Y Pb Pr) output, and vice versa. It can cater for sync on green or composite sync input and also provide sync on green or composite sync output. LED indicators provide useful information on the type of signals present and which process is being performed.
IR Distribution Eye Routing Commander Achieve independent control of multiple SKY Receivers within the same cabinet! The KERC is a sophisticated IR Control Distribution device, designed primarily for use with UK SKY® satellite decoders. It is particularly suited to installations of multiple SKY® receivers as it is able to overcome the problem of receivers of the same type all responding to the same IR code.
IR Distribution IR Universal Wand. The Universal Input Components wand is designed for use in low power outputs and can be equipment fascia or shelf mounted. Standard IR Receiver 40kHz – suitable for most domestic equipment. £5.99 Code IRUW Code IRSR £12.99 IR Dual output Wands The single jack plug drives two IR emitter wands. The emitters are extremely tiny (just 9mm across) and are supplied with double sided adhesive pads to affix directly to the equipment fascia.
IR Anywhere / Matrix KIRA RS232 IR Commander Matrix A new addition to the IR Anywhere family, the KIRA RS232 is similar to the KIRA128 except that the jack socket for an external IR receiver has been replaced with an RS232 port. It still has an on-board IR receiver should you need it. In addition to the ability to send stored IR codes when triggered by IP commands it will also send stored IR codes when triggered by Keene defined ASCII commands via RS232.
IR Anywhere / Powermind DemoControl The app gives you a graphical front end with which to access the 128 stored IR codes within the memory locations of a KIRA128, IRCM or KIRARS232. The codes are assigned to three devices (Display, Set-top box & DVD) and the app can be used on iPhone or iPad. The app is available on iTunes for free (search “DemoControl”). A FREE app now available for the iPod and iPad from the iTunes store Available at http://www.demopad.com/democontrollite.
IR Distribution IR Over RF Aerial Cable If you’ve used RF aerial cable to run signals to another TV in the house you can use the same cable for IR control. The Keene RF2IR product allows IR control signals to be distributed via conventional aerial coax cable. The IR receiver is the same as that used by the common “sky-eye” type systems although it is not limited to satellite receivers and may be used with almost all IR controllable AV equipment.
IR Distribution Adaptors for the IR Distribution Amplifiers Useful adaptors for the IRBKIT, Cat5Blasters & IR Commander Matrix. 3.5mm Plug To CAT5 Socket A short (25cm) line adaptor with an RJ45 line socket to a 3.5mm stereo jack plug. Supplied in pairs, for use with the Keene IRCM and IRBKIT, allowing wands and receivers to be easily extended using standard CAT5 cables. 3.5mm Stereo Jack to Phono Plug 3.
IR Distribution IRPRO4 SYSTEM • Four BestSelect IR Receiver inputs • Direct cabled input that can be used with other manufacturers IR Blaster outputs • Four IR Emitter outputs for use with any Keene IR emitters • USB power option The Pro4 IR Distribution amplifier has some powerful features for demanding installations. It has four IR Receiver inputs, and uniquely all four receivers can be located in the same room if needed.
IR Distribution, AV over CAT IRBKIT MINI The Keene IRBKIT MINI is a very compact IR Distribution Amplifier. It allows you to use your remote control on equipment located in positions where your remote wouldn’t normally work. For example, equipment placed inside cabinets with closing doors or located on shelves behind you or around a corner. Because of the compact size and light weight the IRBKIT mini can also be attached to the rear of a wall mounted display, ideal for use with items such as Apple TV®.
AV Distribution Coosis HDMI Distribution Amplifiers The Coosis HDMI Distribution amplifiers are compact devices that gives multiple simultaneous HDMI outputs from one HDMI input, ideal for viewing on multiple displays. The Coosis units can also be cascaded together in a “pyramid” network to provide a one-to-many solution.
HDMI Distribution / RF HDMI v1.4 3D Over CAT5 New from Aavara, this is one the newly released Professional series of HDMI Cat5 3D Extenders. The PE121L is fully HDMI v1.4 spec compliant, featuring 3D, IR, Audio Return Channel and HDMI Ethernet Channel Pass-Thru, all via twin CAT5E cable. Fully compatible with Blu-Ray 3D and featuring IR pass-through this is a great problem solver and it's compact size makes it very unobtrusive.
HDMI – Distribution HDMI over CAT5 VGA to HDMI These products makes a very affordable method of sending HDMI over long distances whilst preserving the full HD capability. The transmitter converts the HDMI signal into a balanced differential signal and the receiver converts it back into a conventional HDMI signal again. It uses two runs of CAT5E (or CAT6) cable and allows for full auto-adjustment of feedback and equalisation with no user-intervention required.
HDMI HDMI Switchboxes Value Range HDMI 1:2 Distribution Compact low cost HDMI switchboxes offering excellent value for money. Auto source selection (plus IR for SW103) • Easily switch between HDMI sources • Full HD 1080p supported • Compatible with HDMI 1.3b & HDCP The Coosis 2 way HDMI Distribution amplifier is a compact device that gives two simultaneous HDMI outputs from one HDMI input, ideal for viewing on multiple displays.
HDMI Cables Aavara High Definition HDMI Cables These are top specification Hi-Definition AV Cables fully supporting all of the latest HDMI specifications, including: 3D, 4K, ARC (Audio Return Channel), HEC (HDMI Ethernet Channel). The construction features pure gold 24K plated end shell and connector with a protective braided cable sheath. Specifications: • Works with PS3, XBOX, Blu-Ray/HD/DVD player, Set Top Box • 1.
HDMI Cables HDMI CABLES High Speed with Ethernet Coosis Python HDMI Cables V1.4 cables with High Speed 1080p support plus ethernet capability. Code HDHD141 length 1m Code HDHD1418 length 1.8m Code HDHD143 length 3.0m Code HDHD145 length 5.0m Code HDHD1410 length 10.0m £4.99 £11.99 £14.99 £17.99 £34.99 The Coosis Python series of HDMI cables are ultimate High-Speed with Ethernet cables (Cat 2) for HD signal transmission. Upto 15.
HDMI / White Balance HDMI 3 X 2 Switcher Splitter Value Range The HDMI Amplifier Switch Splitter is an HDMI splitter with the ability to switch between 3 inputs to display to 2 outputs. It distributes the input into the two identical outputs simultaneously. Each output can achieve a long distance transmission of a HDMI signal of up to 15 metres. Two or more products may be cascaded to achieve a larger distribution and longer length. Operation is by front push button control or by (supplied) IR remote.
D-SLR Seagull LCD Viewfinder for DSLR HD Video The DSLR LCD Viewfinder is a great accessory for anyone using a DSLR to shoot video. It solves the 3 major problems: 1. The necessity to view images continuously on the LCD screen which, in turn, effects stability and thus focus where the camera has to be handheld away from the body. 2. The inability to actually ‘see’ any image on that same screen when working in any bright lighting conditions. 3.
D-SLR Black Widow Spider Black Widow Belt Spider Holster for lightweight DSLRs and point-andshoot cameras. Don’t get us wrong, the Spider Holster Black Widow is designed to be very comfortable when worn on your own belt. But our adjustable belt will make your camera feel like a feather so you can stay comfortably holstered all day long. One size fits most, adjustable from 23 - 48 inches.
Videography Seagull LED Lights LED126T D-SLR Shoulder Rig The light head carries 126 super-bright LED bulbs to give plenty of illumination. These are controled by the onboard on / off slider switch and a rotary dimmer gives you control over the amount of light to be used. Rather than use the traditional choice of AA or AAA batteries, the LED126T uses a Sony type lithium-ion camcorder battery with a hefty 4600mAh capacity (included) to give plenty of shooting time.
Videography Black Magic Intensity Pro Beyond the Limits of HDV Intensity Pro features the worlds first HDMI and analogue component, NTSC/PAL and S-Video capture and playback on Windows and Mac OS X computers. That's great for HDTV or standard definition editing using big screen televisions and video projectors. Work in uncompressed video and eliminate HDV and DV compression quality problems, or use disk space friendly compressed video if required.
Conversion & Distribution RGB to S-Video Convertor RGB is a great method of sending video, with picture resolution as good as s-video and vastly superior to a std composite signal. The problem is not everything can accept an RGB signal and often composite is your only option. Well, here’s another problem solved! This Box converts the RGB scart output from Sky Digital/OnDigital boxes and DVD players into S-video plus audio.
Wireless HDMI Gigavideo 821 Wireless HDMI Sender At last, a cable free solution for HDMI. The transmitter has two HDMI inputs and includes a local HDMI pass-through output so you can still view the sources locally. Switch between any of the two inputs and watch the output cable free at a distance of up to 30m (clear line of sight, or typically 15m through walls). The signal is uncompressed so the output will stay as true HD up to and including 1080p.
Supports BT15 Centre Speaker Wall Mount with Adjustable Arms Designed for loudspeakers up to 15kg (33lbs) • Ideal for centre channel speakers, DVD players and other AV equipment • Allows speaker to be positioned for optimum esoteric performance • Easy adjustment of arm depth • Simple installation with all mounting hardware included Specifications • Maximum Weight: 15kg (33lbs) £12.99 £12.
Inspection / Distribution CDM CELESTRON DIGITAL MICROSCOPE Great product for education, discovery, work and fun. This innovative microscope design allows you to view specimens or objects on a computer screen and allows you to take snapshot images or short videos. A rugged, metal stand is included for holding the microscope steady at various positions for viewing and/or imaging.
Power Solutions Internet Controllable Mains Switch New from Keene, the IPMSW1 is an IP controllable mains power switch. It has two independent mains outlets that can be controlled in a number of ways. Features: • Simple browser button based on / off control. • Full browser based set-up and timer configuration • Adjustable power fail re-start options allow each switch to delay up to 255 seconds before switching on.
AV Wall Plates Scart outlet plates 15pin HD outlet plates Scart outlet plate which fits a standard UK single pattress and provides a scart socket. The rear of the sockets have solder type connections. Standard size white wall single outlet plate with a 15pin HD female connector. The rear of the plate also has a 15pin female socket making it easy to connect to premade 15pin HD cables. Code HCP11 Code HCP11S steel finish £3.99 £14.99 Code HCP21 white Code HCP21S brushed steel £9.99 £15.
A small selection from the AV accessories on www.keene.co.uk Mighty Brighty Projector Screen Paint & Border Mighty Brighty turns a wall into a projection screen! Mighty Brighty is a new and unique concept for creating a perfect projection screen right on your wall or any other smooth surface. Just paint it on, sit back and enjoy. An image projected on Mighty Brighty Projection Screen Paint has much better contrast and brightness than that of a plain white wall.
