Specifications
To program the Telecontrol/Vocal Message Timeout:
1. From the Programming menu, select Communications, Comm.
Options, TC/VM Timeout [95411].
2. Enter a time (001-255 seconds).
3. Press 3 when the desired setting is displayed.
10.6.12: TWA Mode
The Two-Way audio features offer a choice of two operation modes:
x Duplex – both parties may speak at once just like a regular telephone.
x Simplex – one party may speak while the other party listens.
To program the TWA mode option:
1. From the Programming menu, select Communications, Comm.
Options, Two-Way Audio, TWA Mode [95412].
2. Select Duplex or Simplex.
10.7: GSM Options
10.7.1: GSM RX Report
The GSM RX Report is a feature that periodically reads the GSM signal strength of the
Cellular Communications module – see 4.7.9: GSM Signal Strength. This reading occurs
at the times programmed for the Periodic Test – see 10.6.2: Periodic Test Interval &
10.6.3: First Test. This means that each time the periodic test is sent, the system also
sends a GSM signal strength report to the monitoring station. The system also enters the
GSM signal strength in the event log.
1
If the Periodic Test is disabled, the GSM RX Report feature will not function.
The GSM RX report belongs to the Peripherals event group – see 10.9: Event Options for
Monitoring station Reporting. If this event group is disabled, the GSM signal strength is
still recorded in the event log.
To program the GSM RX Report option:
1. From the Programming menu, select Communications, Comm.
Options, GSM Options, GSM RX Report [954131].
2. Select Enabled or Disabled.
10.7.2: PIN Code
The PIN (Personal Identity Number) is a four-digit code that protects the SIM card from
unauthorized use if lost or stolen.
To program the PIN code:
1. From the Programming menu, select Communications, Comm.
Options, GSM Options, PIN Code [954132].
2. Edit the four-digit PIN code.
3. Press 3 when you have finished editing.
10.7.3: SMS Center
To edit the SMS Centre telephone number:
1. From the Programming menu, select Communications, Comm.
Options, GSM Options, SMS Center [954133].
2. Enter up to 16 digits. Use the
key to enter “*”, “#”, “,” (pause), “T”
(switch to DTMF tone dialling), “P” (switch to pulse dialling) or “+”
(international code). Use the
key to delete one character at a time.
3. Press 3 when you have finished editing.
ProGuard800™ -75-