Specifications

10.6.7: PSTN Country

In order to meet the requirements of local telecommunications authorities, default

telephone line parameters have been chosen for a number of different countries.

To program the PSTN Country:

1. From the Programming menu, select Communications, Comm.

Options, PSTN Country [95407].

2. Select your country from the options available.

Marmitek offers custom telephone line parameter settings for countries that do not appear

in the list of pre-defined options. If your country does not appear among the available

options, select the option Custom Settings.

10.6.8: Dial Tone Wait

This option determines whether the system dials only when the dial tone is present or if

the dialling is initiated regardless of the dial tone.

To program the Dial Tone Wait option:

1. From the Programming menu, select Communications, Comm.

Options, Dial Tone Wait [95408].

2. Select Enabled or Disabled.

10.6.9: RDM Period

Remote Diagnostics and Maintenance (RDM) session is a feature that is designed to

enable automated maintenance of installed control panels. During a maintenance session,

the control panel automatically dials the RP Call-back number and connects to the RDM

server. The time interval between maintenance sessions is called the RDM period.

To program the RDM period:

1. From the Programming menu, select Communications, Comm.

Options, RDM Period [95409].

2. Enter the required RDM period (001-255 days or 000 to disable RDM

communication).

3. Press 3 when the desired setting is displayed.

10.6.10: Incoming Calls

This option determines whether the panel is able to receive incoming Telecontrol/Two-

Way Audio calls.

To program the Incoming Calls option:

1. From the Programming menu, select Communications, Comm.

Options, Incoming Call [95410].

2. Select Enabled or Disabled.

10.6.11: Telecontrol/Vocal Message Timeout

The Telecontrol/Vocal Message Timeout (TC/VM Timeout) determines the duration of a

Telecontrol, Two-Way Audio or Vocal Message call. In the case of a Telecontrol or Two-

Way Audio call, when the time out expires, the system automatically disconnects unless

the call is manually extended by the operator. For Vocal Message calls, if the time out

expires and the user has not acknowledged the message, the system attempts to call the

next VM account’s telephone number. During a Vocal Message call, the timeout is reset

each time a message is acknowledged.