Specifications

1. From the Programming menu, select Communications, Accounts [951].

2. Select a CS account (4-6).

3. From the account’s sub-menu, select Two-Way Audio [#3].

5. Select Enabled or Disabled.

10.3.4: Home ID

The Home ID is a short message that is played at the beginning of a vocal message call

in order to identify the system to the user. For example, at the beginning of the vocal

message call, the message “Michael’s House” shall be played before the event

messages.

To play back the Home ID message:

x From the Programming menu, select Communications, Accounts,

Home ID, Play Message [95191].

To record a Home ID message:

1. From the Programming menu, select Communications, Accounts,

Home ID, Record Message [95192].

2. Press 3 to start recording the message.

3. Record your message. The message may be up to ten seconds long.

4. Press 3 to stop recording; the message is automatically played back

and OK? is displayed.

5. Press 3 to save your recording.

10.4: Remote Programming

Marmitek’s ProGuard800 Remote Programmer (RP) software enables you to operate and

program the system from a PC either on-site or from a remote location. The software

provides a comprehensive interface to the ProGuard800 control panel designed to facilitate

programming.

You can connect to the panel from a PC using one of three methods:

x Direct Call: The RP calls the site, the system picks up and RP

communication is established.

x Call-back: The RP calls the site, the system picks up then hangs up.

The system then calls the Call-back telephone number to establish a

connection.

x USB Connection: The RP connects directly via the Main board’s USB

port (this method requires that you buy a USB Interface).

The following programming options relate to the method in which the Remote

Programmer software connects with the system.

10.4.1: Call-back Telephone Number

RP Call-back is a security feature that helps ensure that remote programming is only

performed by authorized personnel. When the Remote Programmer contacts the panel,

the panel hangs up and calls the Call-back telephone number.