Specifications

10.1.5: Call Attempts
The Call Attempts option determines the number of times the system tries to call a
telephone number before moving on to the next number in sequence.
To program the number of call attempts for an account:
1. From the Programming menu, select Communications, Accounts [951].
2. Select a CS account (1-3).
3. From the account’s sub-menu, select Call Attempts [#5].
4. Enter a value between 01 and 15.
5. Press 3 when the desired setting is displayed.
10.1.6: Two-Way Audio
The Two-Way audio option determines whether Two-Way Audio is enabled for the
account. For further information, see section 5.2.2: TWA Alarm Reporting.
To program the Two-Way Audio option for an account:
1. From the Programming menu, select Communications, Accounts [951].
2. Select a CS account (1-3).
3. From the account’s sub-menu, select Two-Way Audio [#6].
4. Select Enabled or Disabled.
10.2: General Options for Monitoring station Reporting
The options included in this section concern the three accounts used for monitoring
station reporting.
10.2.1: Call Continue
When reporting an event, the system attempts to call Telephone #1. If the system fails in
its attempt to report the event, it dials Telephone #2 then Telephone #3, respectively. If
the Call Continue feature is active, the control panel sends a duplicate report to the
accounts that are selected. For example, using this feature, the system can send an
alarm report to the monitoring station then notify the user by sending an SMS message
to their mobile phone.
To program the Call Continue option:
1. From the Programming menu, select Communications, Accounts, Call
Continue [9517]; the current Call Continue setting is displayed.
Press… To…
1 Toggle Account #1 in the Call Continue sequence.
2 Toggle Account #2 in the Call Continue sequence.
3 Toggle Account #3 in the Call Continue sequence.
Table 10.1: Call Continue Options
2. Use keys 1, 2 and 3 to toggle the account numbers.
3. Press 3 when the desired setting is displayed.
ProGuard800™ -67-