Specifications

-60- © MARMITEK
9.6: Display Options
The following options relate to the information the system displays on the LCD keypad.
9.6.1: Arm Status Display
The Arm Status Display includes the current arm status and any trouble conditions that
may exist within the system. You can program the system to display this information at all
times or only for two minutes after arming or disarming the system.
To program the Arm Status Display options:
1. From the Programming menu, select System Options, Display, Arm
Status [94061].
2. Select Display Always or Display 2 Min.
9.6.2: Banner
The Banner is the 16-character text that you can program to appear on the top row of the
LCD display. This text replaces the arm status if it is programmed to display for two
minutes only – see 9.6.1: Arm Status Display.
To edit the Banner text:
1. From the Programming menu, select System Options, Display, Banner
[94062].
2. Edit the Banner text using the alphanumeric keypad.
3. Press 3 when you have finished editing.
1
The system never displays the Banner text if the Arm Status Display option is
programmed as Always.
9.6.3: Time/Date Format
This option determines the format in which the time and date are displayed.
The following options are available:
x DD/MM/YY, 24Hr
x DD/MM/YY, 12Hr
x MM/DD/YY, 24Hr
x MM/DD/YY, 12Hr
To program the Time/Date format:
1. From the Programming menu, select System Options, Display, Time
Format [94063].
2. Select the required format from the options available.
9.6.4: Supervision Loss Indication
This option enables you to select whether transmitter supervision loss shall be indicated
to the user in the system trouble display.
To program the Supervision Loss Indication setting:
1. From the Programming menu, select System Options, Display, SV Loss
Ind. [94064].
2. Select Enabled or Disabled.