Specifications

To program the Fire Trouble Tones option:

1. From the Programming menu, select Tones, Fire Trb. Tones [938].

2. Select Enabled or Disabled.

It is not necessary to program the Telephone Trouble Tones and Fire Trouble Tones

options if the Trouble Tones option is programmed as disabled.

8.9: Tones Options

8.9.1: Tones Output

The Tones Output option enables you to determine whether the tones sounded when

arming and disarming are sounded by the control panel’s built-in siren or its built-in

speaker.

To program the Tones Output option:

1. From the Programming menu, select Tones, Tones Options, Tones Output [9391].

2. Select Siren or Speaker.

8.9.2: Speaker Volume

The Speaker Volume option determines the volume level of the tones sounded by the

speaker.

To program the Speaker Volume option:

1. From the Programming menu, select Tones, Tones Options, Speaker Vol. [9392].

2. Select High or Low.

It is not necessary to program the Speaker Volume option if “Siren” is selected for the

Tones Output option.

8.9.3: Keypad Selection

The Keypad Selection feature enables you to enable or disable tones sounded by

hardwire LCD keypads.

To program the Keypad Selection option:

1. From the Programming menu, select Tones, Tones Options, Keypad Sel. [9393].

2. Use the 2, 3 and 4 keys to toggle keypad tones on or off for each keypad. If the

number of the keypad appears on the display, tones will be sounded from that

keypad.

3. Press 3 when the desired setting is displayed.

It is not possible to disable tones for the front panel keypad (Keypad #1).