Specifications

4. Select either Enabled or Disabled.

Fire zones always activate the siren regardless of what is programmed for this option.

If the bell is disabled for Panic zones, this also disables all forms of alarm indication from

the on-board keypad in the event of a Panic alarm.

If the Bell option is enabled for Environmental or Flood zones, the system sounds trouble

tones from the keypad.

7.6.4: Chime

When Chime is enabled, triggering the zone when the system is disarmed causes the

internal siren to chime.

To program the Chime option:

1. From the Programming menu, select Devices, Sensors [911].

2. Select the zone you want to program.

3. From the zone’s sub-menu, select Chime [#06]; the zone’s current

Chime setting is displayed.

4. Select either Enabled or Disabled.

7.6.5: Force Arm

Force arming enables you to arm the system when the system is not ready. For example,

a door that is protected by a magnetic contact is open. You may arm the system on

condition that the zone is defined as Force Arm enabled. This door must be closed by

the end of the Exit delay otherwise an alarm is generated. If the magnetic contact’s zone

is defined as Force Arm disabled, the system will not be ready to arm until you close the

door.

To program the Force Arm option:

1. From the Programming menu, select Devices, Zones [911].

2. Select the zone you want to program.

3. From the zone’s sub-menu, select Force Arm [#07]; the zone’s current

Force Arm setting is displayed.

4. Select either Enabled or Disabled.

For the Force Arm feature to function, you must also enable Force Arming in System

Options (see 9.3.1: Forced Arm).

7.6.6: Swinger

A zone defined as Swinger enabled can generate only a limited number of alarms

during a specific time period. The Swinger setting is defined in System Options – see

9.1: Swinger Setting.

To program the Swinger option:

1. From the Programming menu, select Devices, Zones [911].

2. Select the zone you want to program.

3. From the zone’s sub-menu, select Swinger [#08]; the zone’s current

Swinger setting is displayed.

4. Select either Enabled or Disabled.

Do not enable the Swinger option for zones that are always active (Panic, Medical, Fire,

24-hr, Gas, Flood and Environmental zones).