Installation guide

Light Sensor *****
is used to trigger on and off
the Infrared LEDs according
the environmental light level.
Antenna*
Infrared LEDs (x7)*****
allow your camera to
capture clear image in
a dark environment.
Lens Assembly
Power LED
indicates the
camera is powered
on with the steady
amber light.
IP Eye Anywhere
™ IP RoboCam ™
7
Front view IP RoboCam
The camera’s USB*** port supports WCN (Windows Connect Now)
technology, which allows you to use the notebook computer to set
up and store your wireless networking configuration on the USB
storage device, and then retrieve the wireless settings when you
connect the USB storage device to the camera.
NOTE After long pressing the Unmount*** button for four seconds,
the Power LED starts flashing. When the Power LED resumes
the steady amber light, you can remove the USB device safely.
USB Port***
allows you to connect an
external USB device. It
provides the power
distribution up to 500mA.
Link LED
indicates the camera’s
network connectivity
with the flashing green
light.
Internal Microphone *****
allows the camera to receive
sound and voice.