Installation guide

IP Eye Anywhere
™ IP RoboCam ™
63
APPENDIX
A.1 Specification
 Image Sensor
Sensor 1/4” color CMOS
Resolution 640x480
 Video
Compression MJPEG******
MPEG4/MJPEG***
Video resolution VGA/QVGA/QQVGA; 30fps max.
 Audio
Input**** ***** Built-in MIC
Output***** Mono 3.5 mm mini jack plug
Codec PCM/AMR (AMR is for 3GPP only)
 User Interface
LAN One RJ-45 port
Antenna* One external antenna
Reset One Reset button
USB*** USB 1.1 port, with one unmount button;
Power distribution: 500mA Max.
Support FAT, FAT32 file system
GPIO** 1 in/1 out connectors
Input: active high: 9~40V DC; dropout: 0V DC
Output: close circuit current 70mA AC or
100mA DC maximum, 30 Ohm; open circuit
voltage 240V AC or 350V DC maximum
LEDs Power LED (amber); Link LED (green)