Installation guide

Profile Name: Display the profile name that you select in the

Schedule Profiles list.

Weekdays: Select the weekday(s) that you want to

separately assign in the schedule profile. The weekday that

has been assigned will be displayed with green color.

Time List: Display the time period that you have assigned

within the selected weekday. To assign the same time period

to every weekday, click

Add this to all weekdays; click

Delete this from all weekdays to remove the selected

time period from every weekday. Click Delete to remove the

selected time period.

Start/End Time: Enter the start and end time and then click

Add to assign a time period within in the selected weekday.

Event Configuration >> Motion Detect Trigger

Select the Enable option to enable the motion detect trigger function

of the camera, so that you can set Trigger Out function or send

captured images within the detecting area to the FTP server, email

receiver, Network Storage server, or the connected USB device. You

have to configure corresponding settings, such as FTP server and

email server, to enable this feature.