Installation guide

IP Eye Anywhere
™ IP RoboCam ™
21
To set up the preset positions, move the camera lens by
clicking the Left/Right/Up/Down buttons to the desired
position first, then select the number (1~8) from the pull-
down list and click the
Apply button. You can enter a
descriptive name for the assigned position in the text box to
identify it easily.

Function Buttons – Use these buttons to control the audio,
video, and trigger functions.
z
Manual Record allows you to record and save a video clip.
z
Snapshot allows you to capture and save a still image.
z
Browse allows you to assign the destination folder to store
the video clips and still images.
z
Talk***** allows you to speak out through the IP RoboCam
21 camera. Please note only one user is allowed to use this
function at a time.
z
Listen**** ***** allows you to receive the on-site sound and
voice from the camera.
z
Trigger Out** allows you to trigger on/off the GPIO output
manually.
NOTE If your PC uses Microsoft Vista platform, maybe you can’t find
these recorded files stored by Snapshot or Manual Record.
Then you need to disable the protected mode of Security in
the IE Browser. Please follow the below Steps:
1. Open IE Browser
2. Select
Tools
Æ
Internet Options
3. Select
Security