Installation guide

where you clicked to display it in the central part of Live View

area.**

z When you enlarge the Live View by clicking the Zoom In

buttons (2x or 3x), you can move the displayed image by

right-clicking your mouse on the Live View area. The position

where you right-clicked will be displayed in the central part of

Live View area.**



Zoom In Buttons – Click the buttons to zoom in the live view

image by 1x, 2x, and 3x.



Nightmode Button – Click the button to enable the “nightshot

mode” to deliver clearer images in the dark environment.

However, this will reduce the frame rate of video setting.



Live View/Setup Switch – Click Setup to configure the

camera. For details, see Chapter 4.



Compression Buttons*** – Select to transmit and record the

video using MPEG4 or MJPEG compression.



Pan/Tilt Buttons** – Provides the buttons to control the IP

RoboCam camera lens:

Left/Right/Up/Down/Home buttons allow you to move

the camera lens position. Clicking the

Home button will

move the camera lens to the assigned home position.

Auto Patrol button controls the camera to automatically

scan the preset positions once. Click

Stop to stop patrolling.

z Click the

Number button (1~8) to move the camera lens to

the preset position immediately.

Down

HomeLeft