Installation guide

IP Eye Anywhere

™ IP RoboCam ™

1 PREFACE

Thank you for purchasing the Marmitek Wireless* Pan-Tilt**

MPEG4/MJPEG*** Network Camera, a powerful dual-codec***

wireless* network camera with the 1-way**** or 2-way***** audio

function that provides the high-quality image and on-the-spot audio

via the Internet connection. The Infrared LEDs and light sensor

*****enable the camera to capture images even in the dark

environment. The camera’s pan/tilt** functions allow you to control

the camera to monitor everywhere remotely. Through the GPIO**

connectors, the camera can attach a variety of external devices for

your specific purposes. The camera can be installed as a standalone

system within your application environment easily and quickly, and

supports remote management function so that you can access and

control it using a Web browser on your PC.

Not all cameras have all the options installed. Options are marked

with one or more * and have the following definition:

*IP Eye AnyWhere 11, 21, IP RoboCam 11, 21

** IP RoboCam 10, 11, 21

***IP Eye AnyWhere 20, 21 IP RoboCam 21

**** IP Eye AnyWhere 20, 21

*****IP Robocam 21

******IP Eye AnyWhere 10, 11, IP RoboCam 10, 11

This Advanced Installation Guide provides you with the instructions

and illustrations on how to use your camera, which includes:

Chapter 1 Introduction to Your Camera describes the

features of the camera. You will also know the components and

functions of the camera.

Chapter 2 Hardware Installation helps you install the camera

according to your application environment. You can use

this camera at home, at work, at any where you want.