Installation guide

3.2 Accessing to the Camera

Whenever you want to access the Marmitek IP camera:

1. Connect your camera to the network (or the PC directly).

2. Since the default configuration of the camera is DHCP mode

enabled, you are recommended to launch IPFinder to search the

IP address that is assigned to the camera by the DHCP server,

and then click

Link to access the camera via the Web browser.

3. When the login window appears, enter the default User name

(admin) and password (admin) and press

OK to access to the

main screen of the camera’s Web Configuration.

Enter the User name

and Password.

NOTE If you are initially access to the camera, you will be ask to

install a new plug-in for the camera. Permission request

depends on the Internet security settings of your computer.

Click Yes to proceed.

After you login into the Web Configuration of the camera, the main