Installation guide

IP Eye Anywhere

™ IP RoboCam ™

address of the camera)/mpeg4.

 Supports Multiple Profiles***

The camera supports multiple profiles simultaneously, so that you

can separately set up different image settings (such as image quality

and frame rate) for the three video types of the camera: MPEG4,

MJPEG, and 3GPP.

 I/O Connectors Provided**

The Marmitek IP RoboCam camera provides the I/O connectors on

the rear panel (IN/OUT), which provide the physical interface to send

and receive digital signals to a variety of external alarm devices. You

can connect a special featured device, and then configure the

settings and control the device from the GPIO Trigger window of

Web Configuration.

 Remote Control Supported

By using a standard Web browser or the bundled UltraView software

application, the administrator can easily change the configuration of

the camera via Intranet or Internet. In addition, the camera can be

upgraded remotely when a new firmware is available. The users are

also allowed to monitor the image and take snapshots via the

network.

 Supports Connection to the External Devices***** ***

With the auxiliary Input/Output connectors, you can connect the

camera to a variety of external devices, such as the external speaker

and the USB device.

 Multiple Platforms Supported

The camera supports multiple network protocols, including TCP/IP,

SMTP e-mail, HTTP, and other Internet related protocols. Therefore,

you can use the camera in a mixed operating system environment,

such as Windows 2000 and Windows XP.

 Multiple Applications Supported

Through the remote access technology, you can use the cameras to

monitor various objects and places for your own purposes.

For example, babies at home, patients in the hospital, offices and