Installation guide

© MARMITEK
10
Features and Benefits
 MPEG4/MJPEG Dual-codec Supported***
The Marmitek IP camera provides you with excellent images by the
MPEG4/ MJPEG dual-codec selectable technology, allowing you to
adjust image size and quality, and bit rate according to the
networking environment.
 1-way Audio Capability****
The built-in microphone of the Marmitek IP Eye Anywhere camera
provides on-the-spot audio via the Internet, allowing you to monitor
the on-site voice.
 2-way Audio Capability*****
The built-in microphone of the Marmitek IP RoboCam 21 camera
provides on-the-spot audio via the Internet, allowing you to monitor
the on-site voice. In addition, you can connect an external speaker to
the camera to speak through the camera.
 Day & Night Surveillance Supported*****
The seven Infrared LEDs around the standard lens assembly enable
the Marmitek IP RoboCam 21 to capture crystal clear images in the
dark environment or at night. When the Light Sensor detects the
environmental light level becomes low, the camera captures the
images in black & white mode using these infrared LEDs.
 Optimal Viewing**
With the pan/tile functions, you can easily monitor everywhere via
the Marmitek IP RoboCam camera by moving the camera lens to the
left/right (165/165 degrees) or up/down (90/15 degrees). In addition,
you can assign up to eight positions for the camera, enabling you to
move the camera lens to the desired position quickly.
 Supports RTSP***
The camera supports RTSP (Real Time Streaming Protocol), which
is a technology that allows you to view streaming media via the
network. You can view the real-time video with the Quick Time player
or RealPlayer. To view the real-time streaming image on your
computer, open the Web browser and enter the RTSP link: rtsp://(
IP