Installation guide

Ethernet Cable Connector
connects the network
cable, which supports the
NWay protocol so that the
camera can detect the
network speed
automatically.
External Antenna
Connector* connects
the external antenna.
DC Power Connector
connects the AC
power adapter, in
order to supply power
to the camera.
USB Unmount Button ***
is used to remove the
connected USB device
safely.
Audio-out
Connector*****
connects an external
active speaker.
IP Eye Anywhere
™ IP RoboCam ™
9
GPIO Connectors**
is used to connect the
external devices.
Reset Button
will restart the camera when it
is pressed quickly; when it is
pressed and held for five
seconds, the camera will
resume the factory default
settings.
Rear View IP RoboCam