Installation guide

Technical data
Image Sensor
Image Sensor
Resolution
Ligh Minimum Illumination
Lens
Aperture (F/No.)
Focus Length
View Angle(Diagonal)
Image Processing
Compression
Auto Exposure Control
Auto White Balance
Auto Gain control
Light Frequency
Image Resolution and Frame rate
System
Network Processor
System ROM
System RAM
Power
Power Consumption
Environment Operation:
Communication
Ethernet
Wireless
Supported Protocols
LED and Button
Power LED
Link/act. LED
Reset button
Feature
Image setting
Upside down and Mirror
Digital Zoom
Frame rate setting
Compression Ratio Setting
3GPP support
IP Setting
Email
Time Management
Event Management
FTP Upload
Motion detection
IP Filter
System Management
Device Configuration
User Administration
LED control
Smart Setup Wizard
Reset Function
Browser
API
Software
Supported OS
Application Software
IPFinder
Minimum system requirements
General
hardware
Operating system
network
Camera
Processor
Memory
Screen Resolution
Web browser
Application Software
Processor
Screen Resolution
16MByte SDRAM
NA
TCP/IP, UDP, ICMP,DHCP,NTP,DNS,DDNS,SMTP,FTP,HTTP, PPPoE, UPnP
IP Eye Anywhere 10
2.6
800x600 or above
Intel Pentium III 350MHz or above
128MB
Auto search IP Address of Camera in LAN
CD ROM drive
Microsoft® Windows® 2000/XP/Vista
/7
General User have all authority in Live view page
Administrator have View video and All configuration setting.(default: admin/admin)
Guest User just have View video function only.
Brightness, Sharpness, Saturation
Orange Color
Green Color
Push and Release button will be Reboot. Push and hold over 5 sec will be Factory reset
One RJ45 port; IEEE 802.3u compliant
10/100 Mbps Fast Ethernet with Auto-MDIX
Yes
Yes
Yes
MJPEG
1/4” Color CMOS Sensor
640 x 480, 320 x 240, 160 x 120
0.5 LUX
Microsoft® Internet Explorer 6.0 or above, Apple Safari 2 or above, Mozilla Firefox 2.00 or above
1024x768 or above
1 camera connected: Intel Pentium III 800MHz; 512MB RAM
2 ~ 4 cameras connected: Intel Pentium 4 1.3GHz; 512MB RAM
5 ~ 8 cameras connected: Intel Pentium 4 2.4GHz; 1GB RAM
9 ~ 16 cameras connected: Intel Pentium 4 3.4GHz; 2GB RAM
10Base-T Ethernet or 100Base-TX Fast Ethernet
For developing application software
Windows 2000/ XP/Vista/7
View channel:16 CHs, Record, Playback, Motion detect, Backup/Restore to/from Configuration file
Normal / Off
Quick Installation setup step by step
System reboot button. Reset all configuration to factory default values button.
Internet Explore 6.0 above, Firefox , Safari
2 scalable windows
Yes
Web Based Administration, Application Software
Backup/Restore to/from Configuration file
Password protected and 3 levels of Authorization:
Manual Time Setting, Time Server and NTP Support
Events Triggered by Motion detection or according to schedule, Image Upload/Send over email ,FTP
Scheduling
5 levels setting : Lowest ,Low ,Normal, High ,Highest
Static IP Address, DHCP, PPPoE
Support SMTP mail, Scheduling, Two destination email account
No
Yes
3x
Yes (1-25fps,Auto)
DC5V, 230VAC 50 Hz
Operation: Temp: 0 ~ 45 Humidity: 20% ~ 85% non-condensing
Storage: Temp: -15 ~ 60 Humidity: 0% ~ 90% non-condensing
6 watts max.
ARM9 base
4MByte NOR Flash
50Hz, 60Hz or Outdoor
VGA (640 x 480 ) : 30 fps, QVGA ( 320 x 240 ) : 30 fps, QQVGA ( 160 x 120) : 30 fps
60 degree
4.6mm
-53-