Installation guide

MARMITEK
- 50 -
network appear to the Internet as a single address. For
routing messages properly within your network, each
device requires a unique IP address. But the addresses
may not be valid outside your network. NAT solves the
problem. When devices within your network request
information from the Internet, the requests are forwarded
to the Internet under the router's IP address. NAT
distributes the responses to the proper IP addresses within
your network.
Network
A network consists of a collection of two or more devices,
people, or components that communicate with each other
over physical or virtual media. The most common types of
network are:
LAN – (local area network): Computers are in close
distance to one another. They are usually in the same
office space, room, or building.
WAN – (wide area network): The computers are in
different geographic locations and are connected by
telephone lines or radio waves.
NWay Protocol
A network protocol that can automatically negotiate the
highest possible transmission speed between two devices.
P
PCM
PCM (Pulse Code Modulation) is a technique for
converting analog audio signals into digital form for
transmission.
PING
Packet Internet Groper, a utility used to determine whether
a specific IP address is accessible. It functions by sending
a packet to the specified address and waits for a reply. It is
primarily used to troubleshoot Internet connections.
PPPoE
Point-to-Point Protocol over Ethernet. PPPoE is a
specification for connecting the users on an Ethernet to the
Internet through a common broadband medium, such as
DSL or cable modem. All the users over the Ethernet
share a common connection.
Protocol
Communication on the network is governed by sets of
rules called protocols. Protocols provide the guidelines