Installation guide

1.2 Getting to Know Your Camera
Power LED indicates
the camera is powered
on with the steady
amber light.
Internal Microphone*
allows the camera to
receive sound and voice.
Link LED indicates
the camera’s network
connectivity with the
flashing green light.
Lens Assembly
USB Port* allows you
to connect an external
USB device.
It provides the power
distribution up to 500mA.
USB* Unmount Button
Is used to remove the
connected USB device
safely.
Front View
* Internal microphone and USB is supported by IEA20 and 21 only.
*The camera’s USB port supports WCN (Windows Connect Now)
technology, which allows you to use the notebook computer to set up
and store your wireless networking configuration on the USB storage
device, and then retrieve the wireless settings when you connect the
USB storage device to the camera.
NOTE After pressing the Unmount button for four seconds, the Power
LED starts flashing. When the Power LED resumes the steady
amber light, you can remove the USB device safely.
MARMITEK
- 4 -