Installation guide

MARMITEK
- 30 -
Video >> Camera
 Image Setting
- Brightness: Adjust the brightness level from 0 ~ 100.
- Contrast: Adjust the contrast level from 0 ~ 100.
- Saturation: Adjust the colors level from 0 ~ 100
.
Click Default to restore the default settings of the three options
above.
- Mirror: Select the Horizontal option to mirror the image
horizontally. Select the Vertical option to mirror the image
vertically.
- Light Frequency: Select the proper frequency according to the
camera’s location: 50Hz, 60Hz, or Outdoor.
 Overlay Setting
- Includes Date & Time: Select this option to display the date &
time stamp on the live view image.
- Enable Opaque: Select this option to set a black background to
the displayed date & time stamp.
Video & Audio >> Video
 MPEG4 (Supported by IEA20 and 21 only)
- Video Resolution: Select the desired video resolution from the
three formats: VGA, QVGA and QQVGA. The higher setting
(VGA) obtains better video quality while it uses more resource
within your network.
- Video Quality: Select the desired image quality from five levels:
Lowest, Low, Medium, High, and Highest.
- Frame Rate: Select Auto or a proper setting depending on your
network status.