Installation guide

CHAPTER 3
ACCESSING THE CAMERA
3.1 Using IPFinder
The Marmitek IP Eye Anywhere camera comes with a conveniently
utility, IPFinder, which is included in the Installation CD-ROM, allowing
you to search the camera on your network easily.
1. Insert the Installation CD-ROM into your computer’s CD-ROM
drive to initiate the Auto-Run program.
2. Click the IPFinder item to launch the utility. The control panel will
appear as below.
Display the connected
camera(s)
Double click to link the
camera
Click About to get the Version information of IPFinder.
Click Link to connect the selected camera.
Click Search to find the IP address of the connected camera(s).
Click Change IP to modify the IP address of the selected camera.
Click Exit to close the utility.
3. Once you get the IP address of the camera, launch the Web
browser or UltraView to access your camera.
MARMITEK
- 12 -