Installation guide

3.2 Accessing to the Camera

Whenever you want to access the camera:

1. Since the default configuration of the camera is DHCP mode

enabled, you are recommended to launch IPFinder to search

the IP address that is assigned to the camera by the DHCP

server, and then click Link to access the camera via the Web

browser.

2. If Network Camera can't get IP Address under DHCP mode,

the default IP Address will be 192.168.0.30.

3. When the login window appears, enter the default User name

(admin) and password (admin) and press OK to access to the

main screen of the camera’s Web Configuration.

Enter the User name

and Password.

NOTE If you are initially access to the camera, you will be ask to install a

new plug-in for the camera. Permission request depends on the

Internet security settings of your computer. Click Yes to proceed.