Operating instructions

In case the confirmation is not received, the Home
Guard will start dialling the second number and fol-
low the same procedure. If the second person does
not give confirmation, the third number will be
dialled.
NOTE:
Instruct the person who’s number has been entered
to give the confirmation 0 just after the beep(s).
Since telephone answering machines or voice mail
facilities will not generate the confirmation, these
will be ignored. It is recommended to do a test with
the people involved in order to let everyone get
aquatinted with the system.
12. TROUBLESHOOTING:
1. The sensor Home Guard does not react to the
remote:
Follow the registration procedure in order to
lock in the remote.
Check that the indicator on the remote comes
on. If not, replace the battery
2. The base station does not react at all, the green
indicator s not on:
Check the power supply and/or the replace the
back-up battery.
3. The telephone dialler does not dial out:
Check that the telephone plug is connected
properly
Check that the telephone outlet is responding
to a normal analog telephone.
4. False alarms:
Reposition the Home Guard, away from heating
elements, direct sunlight, etc.
Check that no pets can trigger the alarm.
5. Limited range of the remote:
Check the condition of the battery and replace
the battery if required.
Check if no other devices interfere on the same
frequency e.g. wireless headphones etc.
6. PIR or siren do not respond:
Check that PIR or SIREN has been activated.
7. Any other malfunction:
Disconnect the Home Guards from mains and
back-up battery. This will reset the Home Guard.
Re-install the Home Guard according to the
instruction manual.
Do not open the power supply or Home
Guard. No serviceable parts inside!
HOMEGUARD MS8000 7
 macman