User manual

emitter. The position sometimes is critical. Once satisfied press the emitter firmly on the
suface (this will not damage your equipment).
If you have problems with the range, try to move the receiver and/or transmitter away from
your connected equipment. This can greatly increase performance of the radio transmission.
5 HOW DO I CONNECT THE GIGAVIEW TO MY PC?
The GigaView has to be connected to the TV-out or Video-out of the PC. The connection can
usually be found on the graphics card. The signal needs to be a so-called ‘composite video
signal’. This is also called CVBS. The connection on your graphics card can look as follows:
• RCA yellow connection. If your PC is fitted with this type of connection, the GigaView
cable can be directly connected to the RCA connector of the GigaView.
6 MARMITEK ©
Video card
Sound card
Yellow
RedWhite
WhiteYellow Red