Operation Manual
ADVANTAGES
• For connecting gaming computers such as PlayStations and Xbox, Blu-ray Players,
satellite receivers and all other HDMI devices.
• Built-in HDMI Matrix Switcher makes it possible to independently watch different
HDMI sources on two screens (HDTV or HD projector).
• Suitable for Full HD 1080p and all 3D formats.
• With built-in repeater and equalizer for correcting any signal loss, allowing you to
connect up to 15 metres of HDMI cable to the output.
• No interruptions because solid metal, interference-free, top quality housing is used.
• HDMI certified by ATC (Authorized Test Centers).
• Meets HDCP norms (High-bandwidth Digital Content Protection).
HDMI v1.3 PROPERTIES
•
Video bandwidth 225 MHz (enables image to be provided in 1080p, 12-bit and 60Hz)
• 3D (suitable for use with your own 3D equipment).
• Deep Color 36-bit (billions instead of millions of colours, better reproduction of
subtle gradation variances and higher contrasts).
• Dolby TrueHD & DTS HD Master Audio (high quality audio support).
• Lip-Sync (prevents synchronisation problems between image and sound).
• CEC (operate numerous CEC devices with one remote control).
INSTALLATION
1. Connect the HDMI sources to the ‘input’ on the Connect 540™ via HDMI cables.
2. Connect the HDMI screens (HDTV or HD projector) to the Connect 540™’s ‘output’
via HDMI cables.
3. Connect the power adapter to the Connect 540™ and plug into the socket.
4. Pull the plastic strip from the battery compartment of the remote control to activate
the battery and use the remote control.
Tip for installation:
Only use High Speed HDMI® certified cables for the best picture and sound quality.
Do not use much force to connect or disconnect the HDMI cables otherwise they may
become damaged.
HD TV
or
3D TV
HD SET TOP BOX
BLU-RAY / DVD
PC / MOVIE BOX
HD TV
or
3D TV
SATELLITE / DECODER
4 © MARMITEK










