Operation Manual

5. USE

Switching between connected HDMI devices

The Connect 420 UHD™ allows you to choose which HDMI source is

displayed on the TV. If you turn on one of the HDMI sources, it will

automatically switch to the correct input. If multiple HDMI sources are turned

on, the Connect 420 UHD™ will automatically switch to the HDMI source that

was activated last. If you want to select another HDMI source, please use the

remote control or the "Select" button on the front.

Note: Automatic switching must be supported by the HDMI source. If it is not

supported, you should manually select the appropriate HDMI source.

6. FREQUENTLY ASKED QUESTIONS

No (or poor) image and sound

If you experience poor or no picture after connecting the HDMI switcher,

please try to identify the problem by connecting the devices to your screen

(TV, monitor or projector) one by one. This allows you to determine whether

the problem is with the HDMI sources, the HDMI cables, the HDMI switcher

or the screen.

x Make sure the power adapter is connected and plugged in.

x For the best picture and sound quality, only use High Speed HDMI®

certified cables.

x Do not use HDMI cables longer than those specified in the technical

data.

x Check the HDMI cables and/or connectors for damage.

x Both the HDMI source and your screen should fully support HDMI.

x Check that your HDMI sources and screen support HDCP (High

Bandwidth Digital Content Protection) copy protection.

Incorrect 3D display

x Please check whether the HDMI source is set to display 3D and/or it is

set to automatic.

x Both the HDMI source and your HD screen should support the same 3D

formats.

x Please check that 3D is displayed correctly by connecting the HDMI

source directly to the HD display with an HDMI cable.

Any questions that are not answered here? Please visit www.marmitek.com