User guide

7
Programming
a key, and then flash twice and stay off when you have
entered the code correctly:
Product type Code
TV 1000
VCR 2000
SAT/DVB-T 3000
CTV 4000
DVD/TER 5000
CD 6000
GAME 9000
For example, for a TV enter 1000.
Point the MSR+ at the product you want to control,
hold down Function, and press OFF.
Each time you press Function OFF the MSR+ will
step to the next device in the library and send the
corresponding Power off code to the other product.
As soon as the other product turns off, indicating that
this is the correct device, press the same source key
again (eg TV) to store the currently selected device.
•
•
To step back through the device library if you
overshoot press Mute on the MSR+.
The indicator will flash twice to indicate that the
operation has succeeded, and the MSR+ is now ready
to control your other product.
Problems when programming automatically
If you reach the end of the device library without
finding one that switches off your product the indicator
will flash six times.
Press the source key again to resume the search
from the beginning.
If the other product does not turn off, your product
may not be supported by the device library. In this
case you will need to program the MSR+ using your
product’s own remote control as described in Learning
commands , page 8.
Note: When stepping through the device library,
you can use the keys other than Function OFF on
the MSR+ to test other commands in the currently
selected device.
•
•