User guide

Introduction
For convenience the MSR+ provides three alternative
programming options to allow you to control ‘other
products’; ie products from other manufacturers:
You can look up the manufacturer of the product
you want to control in the back of this manual, and
specify the remote you want to mimic by entering a
four digit device code on the numeric keypad.
You can specify the type of product you want to
control, and then search through the available
remote controls until you find the appropriate one
that controls your product.
You can learn each of the commands for the
product from the product’s own remote control.
Learning is the most flexible method but also the
most time-consuming. We recommend you start with
one of the first two procedures and then use learning
to supplement them with any other commands you
want to add.
Note: There is no danger of damaging your MSR+ by
using these procedures. A reset function is provided
which will return your MSR+ to the factory settings;
see Resetting the MSR+ , page 10.
•
•
•
Dedicated (punch through) Meridian
keys
Some keys on the MSR+ are dedicated to controlling
your Meridian system and cannot be reprogrammed
for your other products:
Key Description
OFF
Turns the Meridian system
off.
Volume A, V, and Mute
Control the Meridian system
volume.
DSP
Changes the preset on
Meridian surround controllers.
Function Menu A, V,
<, >, Function Store,
and Function Clear
Control the DSP menus
on Meridian surround
controllers.
Function Display
Changes the display of the
Meridian system.
You can program Function OFF, the Function
volume keys, the menu keys, Store, Clear, and
Display to control your other equipment.
5
Programming
Programming your MSR+