User guide

4
Using
The MSR+ provides 12 source keys to allow you to
select one of the sources in your system.
To select a source
Press the appropriate source key.
The indicator will flash once to indicate that the
command has been sent.
Your Meridian controller will select that source. In
addition, the MSR+ keys will change so that they
control that source.
To use your MSR+ to control a source without
selecting the source on your Meridian system:
Hold down Function and press the source key.
For example, to change the TV channel while listening
to a CD press Function TV, and then use the
numeric keys to select the channel.
To use the function options
Many buttons on the MSR+ have a second function
which enables access to some of the lesser used
features of a Meridian product or system.
For more information see Function keys , page 13.
•
•
To control your other equipment
The nine source keys: AUX, DISC, TAPE, TV,
CABLE, SAT, VCR1, VCR2, and GAME can
be programmed to control other equipment in your
system as described in Programming your MSR+ ,
page 5. The CD, RADIO, and DVD source keys are
dedicated to controlling Meridian products and cannot
be changed.
The volume keys, Mute, and OFF also always
control Meridian products. To use these commands
with other equipment hold down Function with
them.
To illuminate the MSR+ in low light
conditions
Press any key. Use Function to avoid sending a
command.
The backlight will stay on for about five seconds.
•
Controlling sources