User guide

1
Introduction
About the MSR+
The MSR+ is an advanced remote control that
provides a comprehensive range of commands to
allow you to control every product in your Meridian
system straight out of the box. You can also program
it to control your other equipment.
The MSR+ provides a total of 51 keys to give access
to all the most frequently used commands of your
Meridian products, and a Function (or shift) key for
additional less frequently needed operations.
Interchangeable Meridian source keys
For easy selection of sources the MSR+ provides 12
source keys corresponding to the sources provided by
the Meridian digital surround controllers, preamplifiers,
and integrated amplifiers.
The MSR+ is provided with a selection of alternative
keycaps for the source keys which you can use to
match the particular combination of units in your
system. For example, if you own a DVDR, you can
change the keycaps to provide a DVDR key.
Control your other equipment
The MSR+ is pre-programmed to mimic the remote
controls for many popular audio and video products
from other manufacturers, and you can configure it to
control up to nine other products simply by entering
the appropriate device code on the numeric keypad. A
complete list of the supported products is given at the
back of this manual.
Learning commands
Even if you own a product that is not supported by
the device library built in to the MSR+, it includes
a learning mode which allows it to learn up to 120
commands from other remote controls and assign
them to a key on the MSR+.
Backlight
For convenience the MSR+ keypad is backlit, so you
can use it even in low-light conditions. The backlight
automatically turns on as soon as you press a key in
low light conditions.
The MSR+ will have a battery life of over six months
under normal conditions; slightly less if you use the
backlight frequently.
Introduction