Owner`s manual

MULTIPLEXER SYSTEM OPERATION

This chapter shows you how to execute various modes using the system setup menu.

STARTING THE SETUP MODE

1. Check the power cables of the equipment connected to

Monitor and turn the power switch.

2. Press the S. Menu button on the front panel.

Only while in Live Mode, you can enter the setup mode.

MAIN MENU

Press the “S. MENU” button on the front of the system, the main menu of the system setup appears as follows.

• Modifying settings

Select a menu item by using the

 

buttons and press ENTER and then you find the SUB Menu and you can

change the setup by press the direction Key (









)

• Saving the Setting / Returning to the Main Menu

When the modification of each sub menu item is complete, press the Enter button to save the settings. Use this

button to enter a Sub Menu of the Main Menu or to return to the Main Menu from Sub Menu, placed the cursor

on “EXIT”.