Datasheet

X
WWW.MARMITEK.COM
WWW.MARMITEK.COM
22305/010503
Xcam2 PIR
Comparable to the Xcam2, but with built-in PIR Motion Detector and
separate VCR Commander.
As soon as the PIR Motion Detector detects a movement, the video recorder
starts recording or the TV automatically switches to the camera image.
After a period of absence you can see exactly what has happened in
and around your house.
Works with most brands and models of video recorder.
TECHNICAL INFORMATION
Camera CMOS, colour, viewing area 40°
Resolution 370K active pixels (1/3")
Standard Composite video PAL
Light sensitivity 15 Lux
Audio Mono audio via built-in highly sensitive
microphone
Power 230V/12V DC via adaptors provided
(camera and AV receiver)
230V/9V DC via adapter provided
(VCR Commander)
Connection receiver Audio – RCA + Scart
Video – RCA + Scart
Housing transmitter IP44 splash proof for covered outdoor use
Power adapter camera XM11 - 12V DC, Marmitek X10
switchable adaptor
Motion detector frequency 433.92MHz
Frequency 2.4GHz (camera and AV receiver)
433.92 MHz (VCR Commander)
Range 15-30m (indoor) or 100m (open field)
Also available
XCAMMARMITEK
Xcam2 Extra Camera
Extra camera for Xcam2
Xcam2 Batterypack
The solution for locations without mains
voltage (max. 4 hours)
Xcam2 Tripod
Ideal if you want to use the camera in
multiple locations
2.4GHz signal image and sound
Camera with built-in motion
detector
Receiver VR30E
Video recorder
VCR Commander
433MHz
IR signal to activate the
video recorder

Summary of content (4 pages)