Datasheet

Technical Specifications
This IR Receiver is part of the IR Control Pro System. The IR Receiver receives
infrared commands from your remote control and sends these onto the IR
System Module. Install this product according the user manual of the IR Control
Pro System (see www.marmitek.com).
IR Receiver built-on
Frequency range: 30 - 60 kHz
IR reception range: +/- 10 meters
Length of cable: 4 meters, extendable to 300 meters*
LED display: IR reception (RED), Status (Blue)
IR reception angle: 90° (+45°/-45° from centre)
Dimensions receiver: 32 x 13 x 12mm
* Wire recommendation: Use unshielded solid or stranded copper wire (min. 24
gauge, UTP or equivalent) to extend up to 300 meters length.
Copyrights
Marmitek is a trademark of Marmidenko BV | IR Control Pro System™ is a trademark of
Marmitek BV. All rights reserved.
Copyright and all other proprietary rights in the content (including but not limited to model
numbers, software, audio, video, text and photographs) rests with Marmitek B.V. Any use of the
Content, but without limitation, distribution, reproduction, modification, display or transmission
without the prior written consent of Marmitek is strictly prohibited. All copyright and other
proprietary notices shall be retained on all reproductions.
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging
must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed
of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and
electronic equipment via designated collection facilities appointed by the government or local authorities. Correct
disposal and recycling will help prevent potential negative consequences to the environment and human health. For more
detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.
(1) Only the IR receiver must be placed in sight of the remote control.
(2) The second block is only used for indication of IR commands and status
control.
+12V: Orange, Orange, Orange, Naranja, Arancio, Oranje
GND: Blue, Blau, Bleu, Azul, Blu, Blauw
ST: Purple, Lila, Violet, Violeta, Viola, Paars
IR: Yellow, Gelb, Jaune, Amarillo, Giallo, Geel
+12V
GND
ST
IR
Status LED indicator (Blue)
IR LED indicator (Red)
IR Receiver
(1)
(2)