Manual

5
For Models Equipped With
Screw-Adjustable Rear Sights
Horizontal Correction (Windage)
To move the point of impact to the left or
right, loosen the leaf binding screw until
you can move the leaf manually. Move
the leaf in the appropriate direction,
retighten the screw and fire again.
Continue this process until your shots
are horizontally zeroed-in.
Vertical Correction (Elevation)
To raise the rear sight (if you are shoot-
ing low) turn the elevation adjustment
screw clockwise. To lower the rear sight
(if you are shooting high) turn the eleva-
tion adjustment screw counterclockwise.
Continue adjusting and firing until your
shots are vertically zeroed-in.
For Models
Equipped With Fire Sights
Horizontal Correction (Windage) To
adjust the point of impact, loosen the
dovetail screw until you can move the
sight manually. To move the point of
impact to the left, move the rear sight
base to the left. To move the point of
impact to the right, move the rear sight
base to the right. Adjustments can be
made by gently tapping the dovetail por-
tion of the rear sight in the desired direc-
tion. Retighten the screw and fire again.
Continue this process until your shots
are horizontally zeroed-in.
Vertical Correction (Elevation) To raise
the rear sight (if you are shooting low)
turn the elevation adjustment screw
clockwise. To lower the rear sight (if you
are shooting high) turn the elevation
adjustment screw counterclockwise.
Continue adjusting and firing until your
shots are vertically zeroed-in.
Removing the bolt
G
Screw-adjustable rear sight
Fire sight