Specification Sheet

MUH35 SERIES
470 Beauty Spot Rd. E, Bennettsville, SC 29512
visit www.qmarkmep.com for more info
ARCHITECT’S AND ENGINEER’S
SPECIFICATIONS*
•
Unit mounts either horizontally or vertically. Totally
versatile. For factories, warehouses, garages, stores,
shipping rooms, power stations, aircraft hangers. Can be
used for primary, supplementary, spot, or dual-system
heating.
•
Heavy gauge die-formed steel housing.
•
Advanced pull-through air flow design draws air across
heating element for more even air distribution and cooler
element operation.
•
Specially designed venturi outlet to meet that added
throw as required in vertical position.
•
Completely enclosed fan motor.
•
Aluminum-finned, copper clad steel sheath heating
element has longer useful life, because of cooler sheath
temperature and faster heat dissipation.
•
Automatic reset linear thermal cut-out, capillary type,
provides protection over entire length of element areas
•
Ruggedly built, yet lighter weight for easier installation.
No piping flutes, valves, or traps.
• Multiple wattage heat selector switch. Either
5KW or 3.3KW @ 240V (3.7KW or 2.5KW @
208V) for just the right amount of heat.
• Fan only switch allows fan to cycle
automatically with elements or run
continuously for air movement when no heat
is required.
• Built-in bi-metal thermostat. Range 40˚ to 90˚F.
• Heater is shipped with ceiling/wall bracket.
•
Meets all UL, NEC, and OSHA requirements.
CATALOG
NUMBER
MUH35
2 STAGE
ELEMENT
CONTROL
MUH-35
HORIZ.
AIR
THROW
24
INSTALLED
WEIGHT (lbs)
W/ BRACKET
22
WIRE
SIZE
AWG 10
VOLTS
240/
208
PHASE
1
KW
5.0/
3.7
AMPS
21.0/
18.0
CFM
210
FPM
550
VOLTS
240/
208
RPM
1600
HORIZ.
8
VERT.
51
HP
1
/
100
T(°F)
71°
BTU/HR
(000)
17.0/
12.6
CONTROL
VOLTAGE
17.0/
12.6
MAXIMUM EFFECTIVE
MOUNTING HEIGHT
FAN MOTOR DATAAIR DELIVERY DATAELECTRICAL DATA
SELECTION CHART