User manual

36
Cleaning
Cleaning of dirty belts can be carried out with a mixture of glycerin
and spirit in a ratio of 1:10.
Benzene, benzol, turpentine and similar substances may not be
used. Furthermore, sharpedged objects, wire brushes, emery pa-
per etc., may not be used, as they will cause mechanical damage
to the belts.
Ball / roller bearings: Every month, turn the fan shaft and rotate by hand
to distribute grease evenly over the bearing parts. Then, every three months,
inject grease to prevent any blocking of the lubrication lines possibly due to
grease hardening. Whenever the fan shaft has been turned, it is a must to
secure them at a standstill.
Fan units: See manufacture’s instructions in operation and maintenance
manual of the Fan.
SPX Cooling Technologies Services
Our interest in your MH Fluid Cooler does not end with the sale. Having con-
ceived, designed, and manufactured the most reliable and longest-lasting fluid
cooler of its class, we want to make sure that you gain the maximum possible
benefit from its purchase.
Therefore, the following services are available which are intended to: assure
the maximum possible service life under your operating conditions; tailor the
operating characteristics to your specific needs—and maintain consistently
optimum thermal performance capability. They are available by contacting
your Marley sales representative.
Maintenance
Caution