User manual

-25 -
3. The player will then start to play the first track, of the selected directory.
4. To change directories use the direction buttons.
System operation
System operation will define the setting of the set; these definitions will be stored until you
change them again.
General Steps of Setup Menu
1. Pause or Stop the player. Press SETUP on the remote control. The main menu will be
shown, as below.
2. Press the CH + / CH- buttons to select the Icon of the desired section, e.g. “TV
System" and press to open that section.
3. Press CH + / CH - to select the desired feature and again press to open that
section.
4. Press CH + / CH - to select the desired feature and then press "OK" to select the new
setting.
5 To exit the menu, press "SETUP" or CH - to select EXIT SETUP and then press "OK"
When launching the setup routine, the pressing of the following buttons will turn off
the setup menu, while the choices that have been changed will be saved.
Menu specification
1. SYSTEM SETUP
The system setup options are illustrated below: