Operation Manual

Emergency stop and track current turned off, no operation is pos-

sible. This situation can happen when you have pressed the Stop

button or when a short circuit happens on the layout.

Track current turned on, locomotives can be run, turnouts can be

controlled. You must press the Stop button in order to turn opera-

tion on or resume operation after correcting a short circuit.

More information for operating the Mobile Station can be found in the extensive instruction

manual for this product included with this set.

Operating Locomotives

Turning func-

tions on by

pressing the

button by the

symbol.

Turning func-

tions on by

pressing the

button by the

symbol.

Changing the direction

by pressing the speed

control knob.

Controlling the speed.

A locomotive can be controlled with the speed control knob. Functions present on the

locomotive can be turned on with the function buttons.

Place the locomotive on the track, then turn it on

with the “STOP“ button. The locomotive will regis-

ter itself and will be taken into the memory area of

your Mobile Station. The locomotive is now ready

to be used.

For Example