User Guide

Using the Ball Locking Knob
: Fasten or unfasten the ball with friction control
: Set the minimum friction
: Lock or free the panning disk
: Load or unload the plate
: Prevent the plate from slipping
1) Ball locking knob
2) Torque limit dial
3) Panning lock knob
4) Quick shoe clamp
5) Plate stopper
Friction of Q-Ball is controlled by the ball locking knob. If the ideal
friction is achieved, a load stays exactly where you set it while
the load can be tilted or rotated with ease. You can obtain this ideal
tension for the load by adjusting the ball locking knob. The torque
limit dial is to limit the working range of the ball locking knob.
Operating
Instructions
Fine Art
Craftsmanship
Markins Q-Ball
Http://www.markins.com
e-mail: [e-mail]
Markins
R
Thank you and congratulate for purchasing Markins Q-Ball.
Your new gear is created with ultra-precision craftsmanship.
We hope it will be a joy to use, and serve you well in your pursuit of
photographic excellence for years to come.
Notes
The Markins products are designed and engineered by the up-to-date
technologies in precision machining. The Q-Ball
is capable of handling both small 135 format
cameras and large view cameras with ease. So it is not necessary to
over-fasten the ball locking knob when normal light gears are in use.
However, additional tightening after the ball is fastened will not affect
the durability of the parts or unit.
progressive ball
locking mechanism
's
Do not force the ball locking knob to its CCW limit. It can be
locked if the torque limit dial is in use. If locked, unscrew the torque
limit dial with a screw driver, and hold the ball locking knob tight and
apply some impulsive torsional force to unlock it.
Ensure that the quick shoe clamp is tightened when the unit is
transported over a significant time span. (Prevent missing knob)
Clean and dry after using at sea or salty site.
Dry after using the unit when it gets moisture or submerged in water.
Do not subject the unit to dust, dirt or sand.
Use only alcohol or WD-40 for cleaning. Do not use any kind of
solvent such as benzene or thinner, etc.
Do not apply any kind of lubricant to the ball.
Keep out of reach of children.
Be careful not to harm others while carrying.
Do not force the ball locking knob to its CCW limit while the ball is
in loosened condition. Doing so might damage the internal parts.
1)
2)
3)
4)
5)
6)
7)
*
*
*
Patented and patent pending
All specifications and physical appearance are subject
to be changed without notice.
Quick Shoe
Plate Stopper
Progressive Friction
Control Knob for
Ball Locking
Torque Limit Dial
Tripod Lock Hole
Quick Release
Clamp Knob
Panning Lock &
Free Knob
Panoramic Index
* Always lock the panning lock knob except for the panoramic photos.
* Keep the quick shoe clamp knob in upward position for vertical frame.
* Once get used to the ball locking knob and you are using many gears,
fully unscrew the torque limit dial and controlling your gear only with
the ball locking knob could be more comfortable.
General Guidance
Adjusting Torque Limit Dial
Lock the ball and panning disk
Unscrew (CCW) the torque limit dial
Mount the camera or lens on the quick shoe
Fasten the quick shoe knob
By slowly loosening the ball locking knob
Find the desirable friction level of loaded gear
Screw in the torque limit dial to set the position
The friction level that the loaded gear stays
exactly where you set it while the loaded gear
can be tilted or rotated with ease.
1)
2)
3)
4)
5)
6)
7)
(a)
(a)
Cleaning and maintenance
The Markins Q-Ball is manufactured with high precision parts.
Clean your unit if it is contaminated by foreign materials such as dirt,
sand, salty water, lubricant, etc., to ensure smooth and trouble-free
operation. Follow the cleaning instructions carefully.
Fasten (CW) the ball locking knob
Unscrew (CCW) the torque limit dial if it is set
Free the ball by unfasten (CCW) the ball
locking knob and remove any visible foreign
materials from the surface of the ball
Lower the quick shoe
Apply about 3 drops of WD-40 to the ball
Rotate the ball to spread the solution on the
whole surface of the ball
Rotate the ball several times and clean the
surface with clean, lint-free cotton cloth
1)
2)
3)
4)
5)
6)
7)
The thin film of WD-40 left on the surface does not the
performance of the ball head.
degrade
Before going out to the field in cold weather, cleaning can enhance
trouble-free operation and prevent from getting moisture and
freezing.
R
R
R
Copyright (C) 2004 Markins, Inc. All right reserved. Rv-5 : K43
1
2
3
4
5
6
7
MODEL COLOR
DEALER
DATE
Lot No.
1
1
4
3
5
6
7
2