User Manual
INSTALLATION & OPERATION MANUAL 14-0302 REV 4 (11/22)
PAGE
8
OF 16
• 1 3/16’ Allen Wrench • 1 One foot ruler • 1 Screw Driver
Remove all parts from box
Legs (27”) 4
Leg Tops 4
Cap Brackets 4
Lock Washers 8
Flat Washers 8
Round Head Screws (1/4-20) 8
Shelf 1
Set Screw (In Shelf) 4
Legs (4”) 4
Leg Tops 4
Cap Brackets 4
Lock Washers 8
Flat Washers 8
Round Head Screws (1/4-20) 8
NOTICE
For assembly to stand follow steps 1 through 9.
For assembly on legs follow steps 4 through 9.
1. Insert four legs in shelf from top down (1).
2. Measure 12” from bottom of leg to top of shelf in all four positions (2).
3. Tighten set screw securely once shelf is level.
4. Screw four leg tops on four legs (with or without shelf) until they are all the way down.
IMPORTANT
Be sure threaded holes are all on the outside.
7. Tip steam-it on it’s back.
8. Place stand on legs in frame (7) of steam-it (8), making sure that slot (9) in frame matches holes in cap bracket (6).
(8 positions). Tighten all screws (11).
Figure 1