Owner`s manual

16
SECTION 5 FIELD SERVICE INSTRUCTIONS & ASSEMBLY
FULCRUM & DRAIN ASSEMBLY
ITEM PART NO. DESCRIPTION
1 10-3116 1/4” - 20 X 5/8 helicoil
2 10-1999 10-32 Machine screw, 1 5/8” long
3 10-2358 1/4” - 20 fulcrum nut
4 10-2087 1/4” - 20 allen set screw
5 10-3111 1/4” - 20x 3/8 helicoil
6 10-2513 1/4” Shakeproof washer
7 10-1763 1/4” - 20 Machine screw 3/4” long
8 95-0120 Bearing spacer
9 95-0198 Bronze Bearing
10 10-3111 1/4” - 20 x 3/8 helicoil
11 10-2513 1/4” Shakeproof washer
12 10-1790 1/4” - 20 Cap screw 7/8” long
13 10-4485 Drain valve knob
14 10-2514 #10 Shakeproof lockwasher
15 10-2318 10-32 acorn nut
16 95-2643 Adapter - steinball valve
17 10-1950 6-32 Round head screw 1 5/8” long
18 95-2616 Front outer case lower
19 95-0116 Fulcrum and drain casting
20 10-1049 Nipple 1/2” IPS 2 1/4” long stainless steel
21 10-1041 Ball valve stein
- 95-0115 Fulcrum and drain assembly, Items 1 through 12, 14, 15, and 19
THE FULCRUM & DRAIN ASSEMBLY:
The fulcrum and drain assembly is located
at the lower front of the sterilizing chamber
and furnishes a sturdy anchorage for the
door locking system of the door handle. Also
provided in this assembly is a means for ad-
justment of the door seal. The drain port and
drain valve provide a means of discharging
accumulations of water from within the steril-
izing chamber.
ROLLER ASSEMBLY (Items 8 & 9):
The Roller Assembly must be kept free-roll-
ing at all times. Should this assembly be al-
lowed to become frozen due to lack of lubri-
cation, undue strain will be put on the door
handle and the fulcrum casting while the
door is being locked. Use only a dry lubricant
such as graphite; as oil or grease will tend to
attract dirt to this area.