Owner`s manual

SECTION 4 MAINTENANCE

DAILY CLEANING PROCEDURE (AT THE END OF EACH DAY):

Remove bottom splash bafe.

NOTE: IMPORTANT! STERILIZING CHAMBER MUST BE CLEANED AND DRAINED DAILY US-

ING THE FOLLOWING PROCEDURE. WASH WETTED PORTION OF THE CYLINDER THOR-

OUGHLY BY ADDING A MILD DETERGENT TO WATER IN CYLINDER.

If a soft cloth or brush is used with the detergent and does not completely remove the surface lm, a nylon

soap pad should be used. After washing thoroughly rinse with clean water. Dry cylinder* and leave door open

overnight.

* The Sterilmatic cylinder is constructed of corrosion resistant Alclad aluminum alloy. The protective properties

of this material afforded to the interior portion of the cylinder which is exposed to water may be destroyed by al-

lowing a lm to form. Such a lm can be caused by salts or other contaminants in the water. Corrosion may also

occur if water is not drained daily.