Owner`s manual

5
OPERATION
PAN SUPPORT MOUNTING TILTING KETTLES
For convenience during cooking, the pan support
need not be installed until needed for removing food
from the kettles. To Insure correct operation and to
prevent spills the support must be securely installed
as shown in Figure 1 below and as explained below:
Hold the pan support in front of the upright as
shown at A.
Place the stud of the left-hand support upright
into the hole in the left side of the pan support.
Then push the right side of the support in until it
engages the spring loaded pin of the right-hand
support upright, shown at B.
1.
2.
Rotate the pan support upward (C) and engage
the slotted ends of the support links in the studs
at the base of each support upright as in D.
The removal procedure is the reverse of installa-
tion with the exception that in step 2 support upright
springs must be pushed out to release the support
from studs.
3.
Figure 1 Mounting Pan Support