Owner`s manual

INTRODUCTION
This service and parts manual contains general information, operation, and maintenance information
for Market Forge modular kettles. A parts list is included in which each replaceable part is identied and
shown in an accompanying drawing. Accessories for use with the kettles are also described.
DESCRIPTION
Market Forge tilting steam jacketed kettles of three
capacities, each mounted in a modular stainless
steel cabinet.
Double wall construction around the lower half of the
kettle forms a surrounding chamber into which steam
is introduced as a source of heat for cooking.
Steam input plumbing is equipped with a manual con-
trol valve. Condensate is removed through a steam
trap connecting with the kettle drain plumbing as-
sembly. A swivel spout, hot-cold combination faucet
provides a source of water for addition to the kettle
for cooking and cleaning.
An optional 12” spacer unit with faucet and sink may
be used instead of the standard built-in faucet.
25-, 40-, & 60-Gallon Tilting Kettles
Large capacity kettles are tted with heavy duty tilt-
ing mechanisms operated by removable hand crank.
Each model is equipped with a pan support which
maintains continuous alignment of serving pans un-
der the pouring spout at all levels of kettle elevation.
Counterbalanced hinged lids cover the kettles in the
lowered position. All are plumbed for direct connec-
tion to a remote steam source. An optional cold water
circuit to the steam jacket is available for use with all
models for quick cooling of foods after cooking.
Applicable model designation include:
MT-25 A 25-gallon (94 liter) capacity tilting
kettle mounted in a 36” (914mm) wide
cabinet base.
MT-40 A 40-gallon (152 liter) capacity tilting
kettle mounted in a 36” (914mm) wide
cabinet base.
MT-60 A 60-gallon (228 liter) capacity tilting
kettle mounted in a 48” (1219mm) wide
cabinet base.
SERVICE
Modular kettles are exceptionally reliable and durable
cooking equipment requiring a minimum of service
other than routine cleaning and preventive methods
explained in the maintenance section. Should repairs
be required, a network of authorized service agen-
cies is available to assist with prompt service.
A current Directory of Authorized Service Agencies
may be obtained by contacting:
Customer Service Department, Market Forge
35 Garvey Street, Everett, Massachusetts 0214
9
Telephone: [phone]
custserv@mi.com, www.mi.com
The model and serial numbers must be referenced
when corresponding with Market Forge.
The data plate containing model and serial numbers
pertaining to the equipment is located inside the cabi-
net door on the right vertical frame member.
1