Owner`s manual

10
ILLUSTRATED PARTS
GENERAL
This section contains a complete listing off all replace-
able parts of the modular kettles, and of a number of
accessories. For the purpose of parts identication, a
cut-away drawing is shown for each group of similar
kettle models.
Exploded views of sub-assemblies are also provided
where greater detail is needed. Tables lists common-
ly used parts and accessories with a brief description
and part number .
Each parts list contains the gure index number, the
Market Forge part number and an abbreviated de-
scription. Care must be exercised in selecting the
correct illustrated parts list. Check that kettle size and
style coincide with that of equipment to be serviced.
ORDERING INFORMATION
Orders for repair parts should be directed to the near-
est authorized parts distributor.
For a current Market Forge Authorized Parts Distribu-
tor List contact:
Customer Service Department, Market Forge
35 Garvey Street, Everett, MA 02149
Telephone: [phone]
custserv@mi.com, www.mi.com
All orders ‘should contain the Market Forge part
number(s) , the part description(s) , and the model
and serial numbers of the kettle for which the part(s)
is ordered.
lowering, over-powers the drag and allows the screw
to turn with only mild resistance.
Failure of the brake mechanism to function as de-
scribed requires removal of the Saginaw Screw as-
sembly (see saginaw screw assembly removal on
page 7) and disassembly of the brake for cleaning.
Remove the shaft collar at the crank sleeve end
by driving out the roll pin and sliding the collar
off.
1.
Slide the ratchet wheel off and inspect for cleanli-
ness. Use ne energy to remove an, build-up of
soil or glaze on facings.
Thoroughly clean all brake mechanism parts of
dirt and lubricant.
Reassemble the mechanism taking care the
ratchet wheel is facing correctly. Replace, the
Saginaw Screw assembly in the kettle cabinet.
2.
3.
4.
MAINTENANCE